目的 建立考察苯丙氨酯片溶出過程的方法，比較不同廠家的生產工藝及質量。方法 以對照品法，利用FODT-601FX光纖藥物溶出度實時測定儀實時監測苯丙氨酯片的溶出過程，并采用相似因子（f₂）對溶出曲線進行一致性評價。結果 選擇0.5 mm探頭，260 nm為測定波長，苯丙氨酯濃度在20～130 μg/mL與吸光度具有良好的線性關系，r=0.999 9?？疾炝耸惺鄣?個廠家（A～E廠）11個批次的苯丙氨酯產品在水中的溶出曲線，除D廠外各批次苯丙氨酯片的溶出度檢查結果均符合日本橙皮書的規定，但各廠家苯丙氨酯片的溶出曲線存在一定差異，選取樣品C1作為參比制劑，有A、C2、C3、E樣品的溶出曲線與C1相似（50≤f₂≤100），而B、D廠樣品的溶出曲線與C1明顯不同（f₂<50）。結論 光纖法溶出度能客觀反映苯丙氨酯片溶出全過程，監測的5個廠家生產的苯丙氨酯片存在藥品溶出過程不相似以及部分廠家內在質量差異較大的問題。

Objective To compare the differences in intrinsic qualities of products by observing dissolving-out process of phenporbamate tablets from different manufacturers. Methods The fiber-optic real-time dissolution detector was used and conditions adopted for dissolution were in accordance with detecting conditions of phenporbamate tablets dissolution, and similar factor method (f₂) was also used to evaluate differences of dissolution values of different manufacturer's phenporbamate tablets. Results Phenporbamate tablets was monitored at light path 0.5 mm and wave length 260 nm, and its absorbability was better with concentration at range of 20-130 μg/mL, r=0.999 9. Phenporbamate tablets from 11 different batches and 5 different manufacturers (A-E) conformed to the national drug standards (except D), but differences were found in the dissolution curves of those drugs. C1 was used as the reference preparation, only samples A, C2, C3 and E had similar dissolution process with C1's dissolution process (50 ≤ f₂ ≤ 100). However, both samples B and D had clear differences in their dissolution when compared to the dissolution process of C1 (f₂ < 50). Conclusion Fiber optic dissolution test system can objectively reflect the whole dissolving process of phenporbamate tablets.

廣西食品藥品安全科研項目（KY2017-03）