目的 優化金銀花浸膏的真空帶式干燥工藝。方法 將單因素試驗和響應面試驗法結合，確定考察金銀花浸膏的相對密度、第2段加熱溫度、履帶速率和布料速度4個影響因素，以金銀花干浸膏的水分和綠原酸轉移率的綜合評分作為考察指標，對金銀花浸膏的真空帶式干燥工藝參數進行優化。結果 最優化工藝參數為第2段加熱溫度為90 ℃、浸膏相對密度為1.27、履帶速率110 mm/min，布料速度為1.6 L/h。結論 所得工藝耗時短、效率高，工藝穩定，可操作性強，為金銀花工業化生產提供了參考。

Objective To optimize of vacuum belt drying process for Lonicerae Japonicae Flos extract. Methods Single factor test combined with response surface tests were used. Four influencing factors as relative density of extract, two-stage heating temperature, track speed, and distribution speed were confirmed, and the comprehensive score of moisture content and chlorogenic acid transfer rate was used as the evaluation index to optimize of vacuum belt drying process. Results The optimized process parameters were as following: the two-stage heating temperature was 90 ℃, the relative extract density was 1.27, the track speed was 110 mm/min, and the distribution speed was 1.6 L/h. Conclusion The obtained process has short time consumption, high efficiency, stable process, and strong operability, providing a reference for the industrial production of Lonicerae Japonicae Flos.

R283

山東省重點研發計劃(重大科技創新工程)(2021CXGC010508);臨沂市蘭山區科技創新發展計劃(2105)