目的 優化荊芥穗揮發油β-環糊精包合物的高速剪切包合工藝。方法 在單因素考察的基礎上，以包合物收率、胡薄荷酮包合率的綜合評分為評價指標，以β-環糊精與揮發油倍量比、剪切轉速和剪切包合時間為考察因素，采用Box-Behnken響應面法進行包合工藝優化，通過Design-Expert 13軟件分析各因素的交互作用優選最佳工藝條件。結果 采用高速剪切法制備荊芥穗揮發油β-環糊精包合物的最佳工藝參數為β-環糊精與揮發油倍量比為8∶1，β-環糊精與純化水倍量比1∶8，剪切包合時間40 min，剪切轉速為7 700 r/min。結論 優化后的工藝包合率和收率較高，工藝合理可行，對后續產品的研究和生產具有一定指導作用。

Objective To optimize the high-speed shear inclusion process on Schizonepetae Spica volatile oil - β-cyclodextrin inclusion complex. Methods On the basis of single factor test, the inclusion process was optimized by Box-Behnken response surface method with the comprehensive score of inclusion complex yield and pulegone inclusion rate as the evaluation index, and mass ratio of β-cyclodextrin to volatile oil, shear speed, and shear time as the investigation factors. The optimum process conditions were selected by analyzing the interaction of various factors by Design-Expert 13 software. Results The optimum process parameters of preparing Schizonepetae Spica volatile oil - β-cyclodextrin inclusion complex by high-speed shearing method were as following: the ratio of β-cyclodextrin to volatile oil was 8∶1, the mass ratio of β-cyclodextrin to purified water was 1∶8, the shearing inclusion time was 40 min, and the shearing speed was 7 700 r/min. Conclusion The optimized process has high inclusion rate and inclusion yield, and the process is reasonable and feasible, which has a certain guiding role for the research and production of subsequent products.

R284.2

云南省重大科技專項計劃（202102AA310027）；云南省科技人才與平臺計劃（202105AG070014）；石家莊市產業技術研究院建設任務（228790779A）